Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2017
    Location
    ridgeland, sc.
    Posts
    72
    Post Thanks / Like

    fuel basket drivers side

    I think some of one have done this not sure.But I'm installing a walbro 450 pump and doing away with the jet siphon kit that came with my procharger kit.I'm not even sure what it's for....the pump on passenger side puts fuel over to the main pump.But anyway if you (drill holes) in the basket too be sure the pump have plenty of fuel does it effect fuel pressure? Thanks

  2. #2
    Join Date
    Feb 2018
    Location
    Boca Raton, fl
    Posts
    337
    Post Thanks / Like
    I put holes in mine, works fine.
    2013 Chrysler 300S, 6.4 BGE with 6.4 SRT cam, AIT 18% OD pulley, E-force with 2.62 pulley(11.4 lbs boost), fastman 84+4 mm throttle body, 1 7/8 kooks long tubes w/hi-flow cats, 3" Magnaflow Cat-back, FTI 2800 stall, Trans built by Hellraiser, Dings Racing valve body and tune, Getrag 3.73, Walbro 400LPH, DW 65# inj. LG aluminum rad. Dual SRT fans. Complete 4 piston Brembo upgrade. Stage one MOPAR springs, XIX X39 22x9 +15 - 22x10.5 +22 with NITTO 420 265/35R22 - 295/30R22

  3. #3
    Join Date
    Oct 2017
    Location
    ridgeland, sc.
    Posts
    72
    Post Thanks / Like
    did you drill them a particular size and how many.....I know there no actually A way to know if it helped.But knowing it wont hurt either that helps. Thanks

  4. #4
    Join Date
    Feb 2018
    Location
    Boca Raton, fl
    Posts
    337
    Post Thanks / Like
    1/4 bit, about inch off bottom, 1" apart, 3 inch off bottom,, 2" apart
    2013 Chrysler 300S, 6.4 BGE with 6.4 SRT cam, AIT 18% OD pulley, E-force with 2.62 pulley(11.4 lbs boost), fastman 84+4 mm throttle body, 1 7/8 kooks long tubes w/hi-flow cats, 3" Magnaflow Cat-back, FTI 2800 stall, Trans built by Hellraiser, Dings Racing valve body and tune, Getrag 3.73, Walbro 400LPH, DW 65# inj. LG aluminum rad. Dual SRT fans. Complete 4 piston Brembo upgrade. Stage one MOPAR springs, XIX X39 22x9 +15 - 22x10.5 +22 with NITTO 420 265/35R22 - 295/30R22

  5. #5
    Join Date
    Oct 2017
    Location
    ridgeland, sc.
    Posts
    72
    Post Thanks / Like
    thanks that what I was thinking about a pencil size was what I going too use about 1/4 ......thats work for me

  6. #6
    Join Date
    Oct 2017
    Location
    ridgeland, sc.
    Posts
    72
    Post Thanks / Like
    how long have you had this done.....I've read where it affect's fuel pressure I think that's b/s someone posting stuff and hell might not even have car....lol

  7. #7
    Join Date
    Mar 2014
    Location
    FL
    Posts
    131
    Post Thanks / Like
    I'm going on 3.5 years and haven't had a problem. Hell it's been so long I don't even remember how many I put in and how big. But I know I did.

    The holes aren't going to affect pressure. Fuel starvation will. I try to never get below 1/8 of a tank.
    My 2 Ton Beast
    2007 Black 300 SRT8
    Procharged

  8. #8
    Join Date
    Oct 2017
    Location
    ridgeland, sc.
    Posts
    72
    Post Thanks / Like
    yep I agree with that...Thanks



Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •