Results 1 to 10 of 10
  1. #1
    Join Date
    Feb 2015
    Posts
    502
    Post Thanks / Like

    Dash Bezel Retaining U Clips

    I lost a couple of the U-clips tat hold the dash bezel on and I can't see to find them anywhere.


  2. #2
    Join Date
    Mar 2016
    Posts
    177
    Post Thanks / Like

  3. #3
    Join Date
    Feb 2015
    Posts
    502
    Post Thanks / Like
    Not one of those.
    The closest I could find is this: spring clip, except the ends on that one are bent 90 degrees and the ones on the one I need are straight.
    Also, the one I need steps up, it's narrower at the top and then opens up a little.

  4. #4
    Join Date
    Dec 2007
    Location
    Riverside, California
    Posts
    4,597
    Post Thanks / Like
    I spend my time modding your lights and developing new products, not being your FaceBook friend.

    http://www.luxte.ch
    Lux Technologies


  5. #5
    Join Date
    Jan 2008
    Location
    Northern California
    Posts
    1,407
    Post Thanks / Like
    Wish I had better news for you from my experience, but a tech doing some aftermarket work on one of my Chargers at work broke two of those clips. Could not find them individually anywhere. Had to buy a whole new control panel which comes with new ones on it. Needed to get the car back on the road and couldn't have a loose control panel on it. Luckily it wasn't my personal money I was spending. I hope you have better luck...
    'Cuda SRT8

    My Mopars:
    '69 'Cuda FB with MP Hellcrate, a TKO600 and S60 Dana
    '15 Jeep Grand Chickeree in Maximum Steel
    '19 Challenger Hellcat
    RED EYE in B5 Blue (797h.p.)
    '19 Ram 1500 4x4 Hydro Edition (5.7 Hemi)
    "Three Hemis; no waiting"

  6. #6
    Join Date
    Mar 2016
    Posts
    177
    Post Thanks / Like
    Maybe part 6505660AA?

  7. #7
    Join Date
    Feb 2015
    Posts
    502
    Post Thanks / Like
    That's what I was afraid of.
    Doing massive googling I came to that conclusion.
    Tried ClipsandFasteners.com and part number 6505660AA is very close but not exactly.

    What would a dealership do if they were replacing a cluster or HU and they broke (or lost inside the dash in my case)?
    Would they comp a whole new bezel or just slap it back together and hope no one notices?

    I'm going to try some junk yards, see if they let me have the clips.
    These should be the same clips on 2011-current Chargers for the bezel so that widens my search.



  8. #8
    Join Date
    Jun 2013
    Location
    Green Bay Wisconsin
    Posts
    127
    Post Thanks / Like
    salvage yard bud. Just go find a pick 'n pull, go find about any chrysler car and start pulling off panels, they are used on just about everything and you can probably get them for next to nothing or free.
    Mopar11 Charger, MMX Cam, BBK Shorty Headers, Hemifever tune, Getrag 3.91 LSD

  9. #9
    Join Date
    Sep 2007
    Location
    Cornelius, NC via Rochester, NY
    Posts
    555
    Post Thanks / Like
    Swapped the Magnum for a '17 Charger RT 392 SP.
    How can you say 'no' to 485HP and illuminated cup holders?

  10. #10
    Join Date
    Feb 2015
    Posts
    502
    Post Thanks / Like
    I had to go to a local junk yard to get them. Those clips are close but not quite right. The ones on the dash bezel are step down and straight at the ends. According to a few people, they are a subpart of a main assembly and not available for sale individually.

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •