Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2019
    Location
    Missouri
    Posts
    28
    Post Thanks / Like

    Need help On starter/ground wiring

    What’s going on good folks!
    Well i feel like I made the biggest newbie mistake. During my tear down process of my motor(from dropped valve seat) I failed to take any pictures or reminders on how the wiring is down below the winging near the starter. I have the two wires the supposed to connect and bolt to the wire but I have the bulkier red power wire with an l bracket attached. Where does the go and how do I install it correctly? I just finish rebuilding the engine literally a few hours ago and I can’t get the starter to turn/crank. It’s literally no power for start up. ( all other power options are working tho). Any help is greatly appreciated



  2. #2
    Join Date
    Jul 2019
    Posts
    137
    Post Thanks / Like
    The main red wire locks onto a smaller wire then bolts to the main starter post. The end of the smaller wire goes to the alternator.
    Theres also a small wire that goes to the starter solenoid.

    The ground goes from a bellhousing bolt to the small stud by the underhood fuse box.

  3. #3
    Join Date
    Aug 2019
    Location
    Missouri
    Posts
    28
    Post Thanks / Like
    OMG if I could buy you a beer I would thanks man she started right up!
    Thanks 69RT thanked for this post

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •