Results 1 to 5 of 5

Thread: 2017 300s 3.6

  1. #1
    Join Date
    Aug 2019
    Posts
    5
    Post Thanks / Like

    2017 300s 3.6

    84493445_167602511207712_8570023974019268608_o.jpgGood evening all--
    I purchased a 2017 300S Alloy Edition a few months back; here it is with my 92 Daytona IROC R/T. It has the 3.6, and has been a very enjoyable ride so far. Question for the experienced members: I've read a number of posts about the updated Pentastar engine (PUG/PSU) that first showed up in some 2016 models. I'm trying to find out if my 300 has the updated engine or not-- I've seen conflicting information about it. I want to add some mild performance mods, but obviously there's no point in installing a PUG lower intake or 8 hole injectors if the car already has them. 83680067_167602417874388_6638539883512070144_o.jpg
    Likes bambam7171 liked this post

  2. #2
    Join Date
    Feb 2018
    Location
    Boca Raton, fl
    Posts
    434
    Post Thanks / Like
    Nice ride, too bad they make you put that front plate on.
    2013 Chrysler 300S, Stock 6.4 BGE with 6.4 SRT cam, AIT 18% OD pulley, E-force 2.62 pulley(12.2 lbs boost), fastman 84+4 mm throttle body, 1 7/8 kooks long tubes w/hi-flow cats, 3" Magnaflow Cat-back, FTI 2800 stall, Trans by Hellraiser, Dings Racing valve body and tune, Getrag 3.73, Walbro 400LPH, DW 65# inj. aluminum rad. SRT fans. Brembo upgrade. Stage one MOPAR springs, XIX X39 22x9 +15 - 22x10.5 +22 with NITTO NT555 265/35R22 - 295/30R22 going in: TSP boosted Stage 4 226/235 582/582 117+4

  3. #3
    Join Date
    Aug 2019
    Posts
    5
    Post Thanks / Like
    Yup, front plates required in NE

  4. #4
    Join Date
    Feb 2018
    Location
    Boca Raton, fl
    Posts
    434
    Post Thanks / Like
    2013 Chrysler 300S, Stock 6.4 BGE with 6.4 SRT cam, AIT 18% OD pulley, E-force 2.62 pulley(12.2 lbs boost), fastman 84+4 mm throttle body, 1 7/8 kooks long tubes w/hi-flow cats, 3" Magnaflow Cat-back, FTI 2800 stall, Trans by Hellraiser, Dings Racing valve body and tune, Getrag 3.73, Walbro 400LPH, DW 65# inj. aluminum rad. SRT fans. Brembo upgrade. Stage one MOPAR springs, XIX X39 22x9 +15 - 22x10.5 +22 with NITTO NT555 265/35R22 - 295/30R22 going in: TSP boosted Stage 4 226/235 582/582 117+4
    Likes bambam7171 liked this post



  5. #5
    Join Date
    Apr 2008
    Location
    Franklin Park, IL
    Posts
    970
    Post Thanks / Like
    Welcome!

    I'm in IL and front plate is also required here. But instead of putting up front and center, I currently have it zip tied it to the lower mesh and off to the side.

    It may be hard to believe but this was legal. I had it like this for years and never had any issues.
    Last edited by bambam7171; 02-19-2020 at 03:09 PM.
    When I was in Iraq, I always carried a picture of my car. When I was asked why I didn't carry a picture of my girl, I said "Because I know my car will be there when I get back. And because I know no one was in my car while I was gone."

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •