Search:

Type: Posts; User: Hemissary

Page 1 of 12 1 2 3 4

Search: Search took 0.07 seconds.

  1. Instead of cutting, simply open the OEM bracket...

    Instead of cutting, simply open the OEM bracket up, remove if from the OEM hose, place it on the new TEFLON / stainless steel hoses and squeeze the bracket closed. In the image you see below, you can...
  2. Check with your Parts Person at the dealership....

    Check with your Parts Person at the dealership. Stock that is no longer considered worth holding in local / regional inventory is sold to other / secondary Distributors of (new) OEM parts. Knowing...
  3. Replies
    0
    Views
    373

    Photo Identity Challenge...

    As the summer winds down and folks have taken (more) pics of their rides, here's a unique challenge. Find one pic only(!) that shows juuust enough detail that will allows Readers to identify what...
  4. Replies
    3
    Views
    446

    It is very(!) likely the older units will work....

    It is very(!) likely the older units will work. Once people realize just how much has not change, like physical attachment points and H / W at both hose ends, many parts magically become...
  5. Replies
    13
    Views
    1,555

    Yes, that particular dipstick is appropriate...

    Yes, that particular dipstick is appropriate (millimeter markings). But...does it actually touch the bottom of the pan? It must(!) touch the bottom of the transmission oil pan to be accurate.



    ...
  6. Replies
    4
    Views
    731

    I experienced some withdrawal after modifying my...

    I experienced some withdrawal after modifying my RT - after reaching the point where it seemed appropriate to stop. I even considered selling it - then try(!) and come up with another worthy project...
  7. FOR SALE You must post a price.

    You must post a price.
  8. Replies
    10
    Views
    798

    The real issue is if the thin upper ring land...

    The real issue is if the thin upper ring land support has indeed been crushed into the ring - not the ring but the fact the thin aluminum land / piston face is now significantly compromised. During...
  9. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    Upper / lower seals on 05'-08'. FYI; any devices...

    Upper / lower seals on 05'-08'. FYI; any devices that help ensure most or all air is pulled through the element, as opposed to gaps around the shroud - is a plus...
  10. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    ​What year is your vehicle? What years are those...

    ​What year is your vehicle? What years are those for?
  11. Replies
    6
    Views
    872

    To gather the answer you want (the right one),...

    To gather the answer you want (the right one), look up the specific tire brand specifications for that tire size. They state the minimum / maximum acceptable wheel width. Note that even with the same...
  12. Replies
    10
    Views
    1,348

    Bad / silly / stupid idea; at 58psi that's a lot...

    Bad / silly / stupid idea; at 58psi that's a lot of fuel being ejected at very high velocity. When all else fails...read the procedure in the Factory Service Manuals (disregard the security warning)...
  13. Replies
    8
    Views
    1,013

    Those particular units are 8 level +/-1% and are...

    Those particular units are 8 level +/-1% and are from Testo. Google temperature measuring strips for other types, styles and applications.
  14. Replies
    8
    Views
    1,013

    Purge Valve - Cooling System

    Years ago I found a nifty little device to replace the pesky 1/4" NPT HEX head plug used to properly remove all air from our cooling systems during servicing:
    ...
  15. Replies
    21
    Views
    13,538

    Understood :^)

    Understood :^)
  16. Replies
    21
    Views
    13,538

    For now...

    For now...
  17. Replies
    21
    Views
    13,538

    Except for Hellcat engines, all OEM pistons have...

    Except for Hellcat engines, all OEM pistons have very small upper ring land supports to meet emissions. Same danger exists from 05' to present...
  18. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    ​I believe they are the same where it counts;...

    ​I believe they are the same where it counts; hemihackman confirmed by PN...
  19. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    Same as - what? 05'-08' and beyond (not sure how...

    Same as - what? 05'-08' and beyond (not sure how far) platforms used the same (dual) fan shroud - up to the switch to single fan systems...


    Regarding the shroud; some on here over the years have...
  20. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    For those wondering about the OEM motors, here's...

    For those wondering about the OEM motors, here's pics of a 746AA XDL. What's noteworthy is this motor has a much greater magnet / winding detent between poles (which indicates to me that operating...
  21. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    Thanks - yes they are the same. Regarding my...

    Thanks - yes they are the same. Regarding my (cooling) knowledge; part of my aero / fluid dynamics background along with cooling design problems hurdles encountered during very high PWR / logic...
  22. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    Its the original shrouds that they were mounted...

    Its the original shrouds that they were mounted on. The three motor casings are the same. Its worth noting that by-far - the most efficient means of moving air through the radiator is to use the...
  23. Thread: Overcooling?

    by Hemissary
    Replies
    52
    Views
    2,884

    Need to know actual vs. dynamic blade pitch /...

    Need to know actual vs. dynamic blade pitch / blade # / blade efficiency, shroud depth / end gap, true blade diameter, actual rpm with blade load, etcetera..

    Even if you calculate an actual value,...
  24. Given the known failure / failure modes, in this...

    Given the known failure / failure modes, in this case, it would be foolish not to replace it. Just as important; ensure the replacement unit is indeed meant for the 6.1 engine, as the tensioner plate...
  25. You - just made that up that a 0.35mm deflection...

    You - just made that up that a 0.35mm deflection - over less than the diameter of the studs themselves is "negliable". Incredible and disappointing - the overtime effort to glam on in an attempt to...
Results 1 to 25 of 300
Page 1 of 12 1 2 3 4