Results 1 to 7 of 7

Thread: Scavenging pump

  1. #1
    Join Date
    Oct 2006
    Location
    Cocoa, FL
    Posts
    396
    Post Thanks / Like

    Scavenging pump

    My oil scavenging pump is on a relay triggered on fuel pump circuit.
    I would like a delay off control to run pump 30 sec or so after shut down.
    Anything like that out there.


    Sent from my iPhone using Tapatalk
    2005 Silver Magnum R/T-
    Forged 5.7 based 392 built by Arrington
    Rear Mount t76 turbo
    3.06 Getrag, Tranzformer (I love that box)
    1st run on new build
    11.8@117 with only 4.5 psi and a 1.8 60'



  2. #2
    Join Date
    May 2013
    Posts
    2,100
    Post Thanks / Like
    Ever figure this out?
    New Setup: 2014 300 SRT8...Build Thread Here http://www.lxforums.com/board/genera...ml#post5038885

    2006 300C SRT8 (sold): Whipple 2.9, HHP 426, 740whp/680wtq on pump, Best ET 10.74 @ 131.8; 835whp/762wtq with meth+MS109, Best ET 9.84 @ 139

  3. #3
    Join Date
    Mar 2016
    Location
    DE
    Posts
    2,828
    Post Thanks / Like
    Probably could use a digiset relay for it.


    Sent from my iPhone using Scat Pack Forums

  4. #4
    Join Date
    Sep 2006
    Location
    Calgary, Alberta
    Posts
    14,802
    Post Thanks / Like
    Plenty of SSR programmable relays:

    https://www.digikey.ca/products/en?k...0delay%20relay
    2005 Magnum RT---Viper Venom Red----440ci Aluminum block----Short Runner Valve Intake--410mm BAER 6S Monoblock Extreme--Eibach Multi-Pro 2

    Custom--Grille Work--Hood--Headlights--Side View Mirrors--Rear Spoiler--Rear Diffuser--SRV Control System--Turbine Wheels

    Likes 06grey300SRT8 liked this post

  5. #5
    Join Date
    May 2013
    Posts
    2,100
    Post Thanks / Like
    One thing I was always curious about, any risk the pumps become un-primed and on next fire up they are sucking air?

    I don't see how running the pump dry for 30 seconds wouldn't do this.
    New Setup: 2014 300 SRT8...Build Thread Here http://www.lxforums.com/board/genera...ml#post5038885

    2006 300C SRT8 (sold): Whipple 2.9, HHP 426, 740whp/680wtq on pump, Best ET 10.74 @ 131.8; 835whp/762wtq with meth+MS109, Best ET 9.84 @ 139

  6. #6
    Join Date
    Mar 2016
    Location
    DE
    Posts
    2,828
    Post Thanks / Like
    Depends on the system. You can do a closed oil system.

  7. #7
    Join Date
    May 2013
    Posts
    2,100
    Post Thanks / Like
    Mine is tapped into the port above the oil pressure sensor, feeds the turbos, then drains to pumps
    New Setup: 2014 300 SRT8...Build Thread Here http://www.lxforums.com/board/genera...ml#post5038885

    2006 300C SRT8 (sold): Whipple 2.9, HHP 426, 740whp/680wtq on pump, Best ET 10.74 @ 131.8; 835whp/762wtq with meth+MS109, Best ET 9.84 @ 139

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •