Results 1 to 3 of 3

Thread: SRT8 seat swap

  1. #1
    Join Date
    Jan 2016
    Posts
    1,359
    Post Thanks / Like

    SRT8 seat swap

    Im swapping seats SRT8s into R/T. Ihave to remove lumbar handle. No socket will fit down there. Looks like a slim nut driver will do,but I dont know size of bolt. Does anyone know?

  2. #2
    Join Date
    Mar 2010
    Location
    Sedalia, Missouri
    Posts
    518
    Post Thanks / Like
    In not answering your question - the bolt will be metric, probably either 10 or 13 MM.
    I put SRT8 seats from a 2008 Charger in my 2008 R/T Magnum. The were bolt in, hook up the connector, and go. No codes or error lights, everything worked.
    Good luck with your project.
    Steve

  3. #3
    Join Date
    Jan 2016
    Posts
    1,359
    Post Thanks / Like
    Thanks Steve, My 2006 R/T is manual passenger side. The drivers seat is done,working great. Passenger side has all seat weight stuff in it. So I switched over the foams and covers. Seat cushion fine - now I have to do seat back but have to remove handle. Looks tiny like 6-7 mm.



Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •