Results 1 to 7 of 7
  1. #1
    Join Date
    Jul 2008
    Location
    Aiea, Hawaii
    Posts
    325
    Post Thanks / Like

    2019 Charger 5.7 with Brembos...will they fit 2015-2016 R/T Charger

    Without having to change the knuckle spindle
    Totally stock for now



  2. #2
    Join Date
    Mar 2016
    Location
    N. GA
    Posts
    432
    Post Thanks / Like
    Yes but if it didn't come with Brembos the knuckles and such need to be changed. Its not a simple caliper and rotor swap-on.



  3. #3
    Join Date
    Feb 2018
    Location
    Tampa Florida
    Posts
    74
    Post Thanks / Like
    Like GAPI said the Brembo Spindles and Knuckles are different. I have done this swap on a 2017

  4. #4
    Join Date
    Jul 2008
    Location
    Aiea, Hawaii
    Posts
    325
    Post Thanks / Like
    Thank you for the input guys, I guess I will just with the aftermarket.
    Totally stock for now

  5. #5
    Join Date
    Mar 2016
    Location
    N. GA
    Posts
    432
    Post Thanks / Like
    I went with the BR9/Pursuit brakes and am totally satisfied and impressed with the results. Gathering the components is a challenge as MOPAR no longer makes the Big Brake Kit so one must hunt down the caliper/bracket assemblies. Rotors are still readily available. I use StopTech off of tire rack.
    For components if not Rockauto 2014 - 2016 (you gotta look everyday because they go fast) I would scour Major Salvage yards. Or even call Centric CS.
    Its worth the trouble. L

    BR9 Police Upgrade
    Last edited by gapi; 03-14-2020 at 01:50 PM.



  6. #6
    Join Date
    Feb 2018
    Location
    Tampa Florida
    Posts
    74
    Post Thanks / Like
    Getting everything together to do the Brembo swap is not that big of a challenge. If you wait you can do it for less than $2k front and rear, and that is for the 6 pistons... I bet you can do the small Brembos for less than $1500.

  7. #7
    Join Date
    Mar 2016
    Location
    N. GA
    Posts
    432
    Post Thanks / Like
    I have just under 1k into my BR9 conversion, it has the same swept area and the smaller Brembos. We call it poor mans Brembos.
    Good luck and enjoy either. Anything above the BR5 is a plus.



Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •