Results 1 to 13 of 13
  1. #1
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like

    Question Diablo predator 2 programer and locked up PCM on 05 Magnum RT

    Hello to night I installed my refurbished PCM from flag Ship one. I have a 05 Dodge Magnum RT. Well after I had the car running I decided to program my car. I bought a used unlocked Predator 2 Platinum SKU 7310 S/N 2012234591. I programmed the car with the 91octane tune.i couldn't find the 93 tune. But following the tuner instructions step by step. It was time to start the car. Well the car wouldn't do anything now. But I did notice that turning the key to run, the electric cooling fan was on and the ABSpump was pulsating. I didn't know it while I was trying to figure out what was going on. Trying to change the tune, now the programmer says my car is not supported and call Diablo Support.
    I decided to put my old computer back in. Went to start it and It was like the engine was locked up. I figured out that the cylinders were full of fuel.pulled all the plugs and flushed all the gas out. Now the engine will turn over. For some reason the tuned PCM turned the injectors on and filled all the cylinders with fuel.
    So has anybody ran into this problem before? I hope I didn't just brick my new PCM. I am going to call Diablo sport Monday and see what they say.



  2. #2
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    I just did a update on the programmer and here is the info. I don't know if this will help. But going to post it any way.
    Installed package r220(0 Files)
    Tune level C
    Version IAP: 23 APP: Dodge NGC3 r13 VID:14 DB:210
    Up to date. Version: 1.67.51006.57228

  3. #3
    Join Date
    Jun 2007
    Location
    Sanford FL
    Posts
    4,355
    Post Thanks / Like
    Did you try starting it with the new pcm before you tried tuning it?
    ALWAYS confirm a new pcm works before you start messing with it.

    From where I sit, I am not convinced that the new pcm was ever going to work. Me and FS1 have some history with these issues
    Please don't PM me, I don't always have time to go through them!

  4. #4
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    Quote Originally Posted by Mike@Diablosport View Post
    Did you try starting it with the new pcm before you tried tuning it?
    ALWAYS confirm a new pcm works before you start messing with it.

    From where I sit, I am not convinced that the new pcm was ever going to work. Me and FS1 have some history with these issues
    Hi yes I let car run with the new PCM until it got up to operating temp. The car ran for at least 20 minutes.

  5. #5
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    Mike what do I need to do to unlock my PCM

  6. #6
    Join Date
    Jun 2007
    Location
    Sanford FL
    Posts
    4,355
    Post Thanks / Like
    Please give us a call, 561-908-0040 and have the device powered up in the car o we can try some things.
    Please don't PM me, I don't always have time to go through them!
    Likes Hemissary liked this post

  7. #7
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    Quote Originally Posted by Mike@Diablosport View Post
    Please give us a call, 561-908-0040 and have the device powered up in the car o we can try some things.
    Ok give me about a hour and I will give you a call

  8. #8
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    Ok I am on hold now. Lol

  9. #9
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    I mean I just called the number you gave me and I am on hold.

  10. #10
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    Ok about a half hour on the phone and Updating the programmer a few times. I can report back that yea my car runs again. I wanted to say thank you so much Stephen Richardson for taking the time to help me.

  11. #11
    Join Date
    Feb 2019
    Location
    Southeast Michigan
    Posts
    1,072
    Post Thanks / Like
    2020 Charger Scat Pack
    Likes Mopar65 liked this post

  12. #12
    Join Date
    Jun 2007
    Location
    Sanford FL
    Posts
    4,355
    Post Thanks / Like
    Quote Originally Posted by Mopar65 View Post
    Ok about a half hour on the phone and Updating the programmer a few times. I can report back that yea my car runs again. I wanted to say thank you so much Stephen Richardson for taking the time to help me.
    Awesome sauce. Sorry for the hassle and thanks for being patient!
    Please don't PM me, I don't always have time to go through them!

  13. #13
    Join Date
    Jun 2020
    Posts
    15
    Post Thanks / Like
    Thank you mike for the help and Advice.

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •